This chapter is not a success story but records of failures. In short, though the mp4 pseudo streaming seems to be working fine but not smooth streaming. I have spent some time on the module source, and it looks like there should be an initialization done before the client's request: "http://.../Fragments()video=0)" which just contains a "moof" and "mdat" box. When I look at the source code, segment initialization requires "moov" box. So, somehow, initialization should be done by a manifest file before the client's fragment request.

Discussion about this issue can be found here..

Anyway, I need to investigate more on this.

After download the source, installation can be done by using these commands from a terminal:

$ ./configure
$ make
$ sudo make install

By default, nginx will be installed under /usr/local/nginx.

A module for smooth streaming for nginx is available at
http://h264.code-shop.com/trac/wiki/Mod-H264-Streaming-Nginx-Version2.

Run configure in the nginx directory with the following command:

$ cd ~/nginx-1.4.4
$ ./configure --add-module=$HOME/nginx_mod_h264_streaming-2.2.7 --sbin-path=/usr/local/sbin --with-debug
...
Configuration summary
  + using system PCRE library
  + OpenSSL library is not used
  + using builtin md5 code
  + sha1 library is not found
  + using system zlib library

  nginx path prefix: "/usr/local/nginx"
  nginx binary file: "/usr/local/sbin"
  nginx configuration prefix: "/usr/local/nginx/conf"
  nginx configuration file: "/usr/local/nginx/conf/nginx.conf"
  nginx pid file: "/usr/local/nginx/logs/nginx.pid"
  nginx error log file: "/usr/local/nginx/logs/error.log"
  nginx http access log file: "/usr/local/nginx/logs/access.log"
  nginx http client request body temporary files: "client_body_temp"
  nginx http proxy temporary files: "proxy_temp"
  nginx http fastcgi temporary files: "fastcgi_temp"
  nginx http uwsgi temporary files: "uwsgi_temp"
  nginx http scgi temporary files: "scgi_temp"

Make and install nginx:

$ make
make -f objs/Makefile
make[1]: Entering directory `/home/khong/Downloads/nginx-1.4.4'
cc -c -pipe  -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g  -D_LARGEFILE_SOURCE -DBUILDING_NGINX  -I src/core -I src/event -I src/event/modules -I src/os/unix -I objs -I src/http -I src/http/modules -I src/mail \
		-o objs/addon/src/ngx_http_h264_streaming_module.o \
		/home/khong/nginx_mod_h264_streaming-2.2.7/src/ngx_http_h264_streaming_module.c
In file included from /home/khong/nginx_mod_h264_streaming-2.2.7/src/ngx_http_h264_streaming_module.c:2:0:
/home/khong/nginx_mod_h264_streaming-2.2.7/src/ngx_http_streaming_module.c: In function ‘ngx_streaming_handler’:
/home/khong/nginx_mod_h264_streaming-2.2.7/src/ngx_http_streaming_module.c:158:8: error: ‘ngx_http_request_t’ has no member named ‘zero_in_uri’
   if (r->zero_in_uri)
        ^
make[1]: *** [objs/addon/src/ngx_http_h264_streaming_module.o] Error 1
make[1]: Leaving directory `/home/khong/Downloads/nginx-1.4.4'
make: *** [build] Error 2

To fix the error, we need to edit the file:

$ vi nginx_mod_h264_streaming-2.2.7/src/ngx_http_streaming_module.c

Comment the lines off as shown below:

 /* Commented out
  if (r->zero_in_uri)
  {
    return NGX_DECLINED;
  }
  */

Still, we may have some issues like this:

$ make
...
cc1: all warnings being treated as errors
make[1]: *** [objs/addon/src/mp4_reader.o] Error 1
make[1]: Leaving directory `/home/khong/nginx-1.4.4'

make: *** [build] Error 2

It's due to the following line of compile option in nginx-1.4.4/objs/Makefile:

CFLAGS =  -pipe  -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g  -D_LARGEFILE_SOURCE -DBUILDING_NGINX

Since the Werror treats a warning as an error, I removed the Werror from the options.

Now the compilation is successful.

So, let's check what's been added?

$ ls ~/nginx-1.4.4/objs/addon/src
moov.o    mp4_reader.o  ngx_http_h264_streaming_module.o  output_mp4.o
mp4_io.o  mp4_writer.o  output_bucket.o

Let's install nginx.

$ sudo make install

nginx can be located at /usr/local/nginx/sbin.

Since we want to play Multi Bit Rate H.264 encoded videos, we will also need the command line tool mp4split to create the Smooth Streaming manifest files.

wget http://h264.code-shop.com/download/mp4split-2.2.0.tar.gz
tar xvzf mp4split-2.2.0.tar.gz

We can make the /usr/local/bin/mp4split command as below:

$ cd ~/mp4split-2.2.0
$ ./configure
$ make
$ sudo make install
 and the executable can be located in /usr/local/nginx/sbin

Edit the configuration file in /usr/local/nginx/conf/nginx.conf so that file requests ending in .mp4 and .ismv are handled by the mp4 command.

We need to add the following lines in our server { ... } section:

if ($is_args = "?") {
 rewrite ^(.*)\.ism/manifest$ $1.mp4?manifest=1 last;
}
rewrite ^(.*)\.ism/Fragments\((.*)=([0-9]+)\)(.*)$ $1.mp4?$2=$3 last;
rewrite ^(.*)/(.*)\.ism/QualityLevels\(([0-9]+)\)/Fragments\((.*)=([0-9]+)\)(.*)$ $1/$2.ism/$2_$3.ismv?$4=$5 last;
rewrite ^(.*)\.ism/QualityLevels\(([0-9]+)\)/Fragments\((.*)=([0-9]+)\)(.*)$ $1.ism/$1_$2.ismv?$3=$4 last;

location ~ \.mp4$ {
  mp4;
}
location ~ \.ismv$ {
  mp4;
}

The $is_args evaluates to "?" if $args is set, "" otherwise:
where $args is the GET parameters in request line, e.g. foo=123&bar=blahblah; This variable could be changed.

    . (any character)
    * (zero of more of the preceding)
    + (one or more of the preceding)
    {} (minimum to maximum quantifier)
    ? (ungreedy modifier)
    ! (at start of string means "negative pattern")
    ^ (start of string, or "negative" if at the start of a range)
    $ (end of string)
    [] (match any of contents)
    - (range if used between square brackets)
    () (group, backreferenced group)
    | (alternative, or)
    \ (the escape character itself)

The last flag tells the server to complete processing of current rewrite directives.

Start nginx:

$ sudo /usr/local/sbin/nginx

We may get the following error:

nginx: [emerg] unknown directive "mp4" in /usr/local/nginx/conf/nginx.conf:58

If that's the case, we should make sure we configured nginx with H264.

./configure --add-module=$HOME/nginx_mod_h264_streaming --sbin-path=/usr/local/sbin --with-debug

When we type in localhost into the browser, we should get:

It's the result of the rendering /usr/loca/nginx/html/index.html file.

This section is incomplete. This approach requires Windows utilities and I could not make it work on Linux (Ubuntu 13.1).

This section follows the general guide from Encoding Smooth Streaming videos

We can get the sample from Big BUck Bunny.

Here are the videos to be generated:

Bit rate (Kbps)	Resolution
4500	1920 x 1080
2008	1096 x 616
896	624 x 352
400	356 x 200

4 encodings will be generated in 4500, 2008, 896 and 400 Kbps.

X264_OPTIONS= --threads 4 --min-keyint 50 --keyint 100 --bframes 0
x264 %X264_OPTIONS -o bbb_4500000.mp4 --pass 1 --bitrate 4500 bbb0.avs
x264 %X264_OPTIONS -o bbb_4500000.mp4 --pass 2 --bitrate 4500 bbb0.avs
x264 %X264_OPTIONS -o bbb_2008000.mp4 --pass 2 --bitrate 2008 bbb1.avs
x264 %X264_OPTIONS -o bbb_896000.mp4 --pass 2 --bitrate 896 bbb2.avs
x264 %X264_OPTIONS -o bbb_400000.mp4 --pass 2 --bitrate 400 bbb3.avs next section.

The avs file looks like this:

QTInput("big_buck_bunny_1080p_h264.mov", audio=false)
BicubicResize(1920, 1080)
ConvertToYV12()

The jobs may be done properly because more stuffs to be installed. If that's the case, please follow the guide in the next section.

To use *.avs, we need to install AvxSynth:
Github - System Setup

Here are the additional packages required:

sudo apt-get install build-essential checkinstall git pkg-config yasm autoconf automake libtool
sudo apt-get install mplayer
sudo apt-get install liblog4cpp5-dev liblog4cpp5
sudo apt-get install libcairo2-dev
sudo apt-get install libpango1.0-dev
LibJPEG sudo apt-get install libjpeg-dev (required to build the frame capture plugin)
sudo apt-get install libffms2-dev libavcodec-dev libavformat-dev libavutil-dev libpostproc-dev libswscale-dev (required to build the ffms2 plugin)

Install steps for AvxSynth:

1. Get AvxSynth source code from github

   git clone https://github.com/avxsynth/avxsynth.git
   

2. Generate build system from autotools templates. This must be done only the first time the project is checked out.

   autoreconf -i
   

3. In avxsynth root directory:

   ./configure && make
   sudo make install
   

If I try to run the 1 pass encoding, I get the following error:

$ x264 --threads 4 --min-keyint 50 --keyint 100 --bframes 0 -o bbb_4500000.mp4 --pass 1 --bitrate 4500 bbb0.avs
avs [error]: Script error: there is no function named "QTInput"
(bbb0.avs, line 1)
x264 [error]: could not open input file `bbb0.avs'

http://linkedin.com/

Fragment and manifest files are created as in ffmpeg Smooth Streaming.

Open Video Player is available at http://sourceforge.net/projects/smthplayer/.

Examples:

• php smthplayer.php --ism http://video3.smoothhd.com.edgesuite.net/ondemand/Big%20Buck%20Bunny%20Adaptive.ism/ --vidx 2
• php smthplayer.php --ism http://mediadl.microsoft.com/mediadl/iisnet/smoothmedia/Experience/BigBuckBunny_720p.ism/ --vidx 0
• php smthplayer.php --ism http://mediadl.microsoft.com/mediadl/iisnet/smoothmedia/Experience/BigBuckBunny_1080p.ism/ --vidx ask
• php smthplayer.php --ism http://video3.smoothhd.com/ondemand/Akamai_ASP_Cutdown.ism/ --vidx ask
• php smthplayer.php --ism http://mediadl.microsoft.com/mediadl/iisnet/smoothmedia/Experience/BigBuckBunny_1080p.ism/ --vidx adaptive
• php smthplayer.php --ism http://aevod-hdnetwork.akamai.com.edgesuite.net/ondemand/demo/earth_seas_h264_1080/earth_seas_h264_1080.ism/ --vidx 0 --nosync
• php smthplayer.php --ism http://aevod-hdnetwork.akamai.com.edgesuite.net/ondemand/demo/earth_trailer_with_end_credit_1080p/earth_trailer_with_end_credit_1080p.ism/ --vidx 0 --nosync

Steps:

1. Download the Apache HTTP Server Version 2.4.7.

2. tar xvzf httpd-2.4.7.tar.gz
   cd httpd-2.4.7/
   ./configure --prefix=/usr/local/apache2
   make
   make install
   

3. To start:

   sudo /usr/local/apache2/bin/apachectl -f /usr/local/apache2/conf/httpd.conf
   

   If you get "Could not reliably determine the server's fully qualified domain name, using 127.0.1.1.
   Set the 'ServerName' directive globally to suppress this message"
   Then, just set "ServerName localhost" in /usr/local/apache2/conf/httpd.conf file.

4. Test if it's running:
   Type in localhost into the url of the browser. Then we'll see:
   It works!
   It's rendering /usr/local/apache2/htdocs/index.html

For general info on Apache Web Server,
check https://help.ubuntu.com/13.10/serverguide/httpd.html.

The Apache Module h264 Streaming enables stream the .mp4 video, otherwise we can only play the video after a complete download.

This section is based on:

• Downloading and building the H264 Streaming Module for Apache (version 2)
• Downloading and building the H264 Streaming Module for Apache (version 1)
• How to encode video in H264 format

Steps to take:

1. Make sure apxs2 installed:

   $ which apxs2 
   /usr/bin/apxs2 
   

   if not insatlled
   

   $ sudo apt-get install apache2-threaded-dev
   

2. Download the source of the H264 Streaming Module for Apache (version 2).

   cd ~
   wget http://h264.code-shop.com/download/apache_mod_h264_streaming-2.2.7.tar.gz
   tar -zxvf apache_mod_h264_streaming-2.2.7.tar.gz
   

3. Build:

   cd ~/mod_h264_streaming-2.2.7
   ./configure --with-apxs=`which apxs2`
   make
   sudo make install
   

4. Edit the configuration file (in /usr/local/apache2/conf/httpd.conf) so that file requests ending in ".mp4" or ".ismv" are handled by the h264_streaming_module.

   LoadModule h264_streaming_module /usr/lib/apache2/modules/mod_h264_streaming.so
   AddHandler h264-streaming.extensions .mp4 
   

   The two lines above allow our web server to stream mp4.

   To make it work for smooth streaming, we need to add/modify the following lines:

   AddHandler h264-streaming.extensions .mp4 .ismv
   
   LoadModule rewrite_module modules/mod_rewrite.so
   
   RewriteEngine On
   RewriteCond %{QUERY_STRING} ^.+$
   RewriteRule ^(.*)\.ism/manifest$ $1.mp4?manifest=1 [L]
   RewriteRule ^(.*)\.ism/Fragments\((.*)=([0-9]+)\)(.*)$ $1.mp4?$2=$3 [L]
   RewriteRule ^(.*)/(.*)\.ism/QualityLevels\(([0-9]+)\)/Fragments\((.*)=([0-9]+)\)(.*)$ $1/$2.ism/$2_$3.ismv?$4=$5 [L]
   RewriteRule ^(.*)\.ism/QualityLevels\(([0-9]+)\)/Fragments\((.*)=([0-9]+)\)(.*)$ $1.ism/$1_$2.ismv?$3=$4 [L]
   
   LogLevel rewrite:trace3
   

5. To restart Apache:

   sudo /usr/local/apache2/bin/apachectl restart
   

• The RewriteCond

  %{QUERY_STRING} ^.+$"

  tells the server not to apply if there is no query string.

  RewriteRule ^(.*)\.ism/manifest$ $1.mp4?manifest=1 [L]

  rewrites bunny.ism/manifest to bunny.mp4?manifest=1.

• RewriteRule ^(.*)\.ism/Fragments\((.*)=([0-9]+)\)(.*)$ $1.mp4?$2=$3 [L]

  rewrites bunny.ism/Fragments(video=60000000) to bunny.mp4?video=60000000.

• RewriteRule ^(.*)/(.*)\.ism/QualityLevels\(([0-9]+)\)/Fragments\((.*)=([0-9]+)\)(.*)$ $1/$2.ism/$2_$3.ismv?$4=$5 [L]

  rewrites dir/bunny.ism/QualityLevels(200)/Fragments(video=60000000) to dir/bunny.ism/bunny_200.ismv?video=60000000

• RewriteRule ^(.*)\.ism/QualityLevels\(([0-9]+)\)/Fragments\((.*)=([0-9]+)\)(.*)$ $1.ism/$1_$2.ismv?$3=$4 [L]

  rewrites bunny.ism/QualityLevels(200)/Fragments(video=60000000) to bunny.ism/bunny_200.ismv?video=60000000

• LogLevel rewrite:trace3

  enables writing logs for rewrite to /usr/local/apache2/logs/error_log file.

• Make a directory 'test', under the DocumentRoot, and get a mp4 file:

  cd /usr/local/apache2/htdocs/test
  wget http://bogotobogo.com/VideoStreaming/Files/nginxSmoothStream/oceans-clip.mp4
  

• Open a browser to see if we can get only 3 sec video by typing the following url:

  http://localhost/test/oceans-clip.mp4?start=20&end=23
  

• Another test we can do is

  wget -O testclip.mp4 http://localhost/test/oceans-clip.mp4?start=20&end=23
  

• then browse to

  http://localhost/test/testclip.mp4
  

  If we see 3 second clip, we are good to go!
  This may not work due to the '&' and it may download the whole file not the part that we want.

The files required to do smooth streaming are listed below:

$ ls /usr/local/apache2/htdocs/BigBuckBunny.ism
BigBuckBunny_1427.ismv  BigBuckBunny_2962.ismv  BigBuckBunny_688.ismv
BigBuckBunny_2056.ismv  BigBuckBunny_331.ismv   BigBuckBunny_991.ismv
BigBuckBunny_230.ismv   BigBuckBunny_477.ismv   manifest

Note that the files are under BigBuckBunny.ism directory. In other words, if we're Smooth Streaming Multiple Bit Rate MP4 files, the necessary files (manifest and one .ismv file for each bit rate) must be located in a directory ending with the extension .ism. When the user request http://server/BigBuckBunny.ism/manifest, it returns the manifest file. The manifest file looks like this:

<!-- Created with Expression Encoder version 4.0.1628.0 -->
<SmoothStreamingMedia MajorVersion="2" MinorVersion="1" Duration="5964583334">
<StreamIndex Type="video" Name="video" Chunks="299" QualityLevels="8" MaxWidth="1280" MaxHeight="720" DisplayWidth="1280" DisplayHeight="720" Url="QualityLevels({bitrate})/Fragments(video={start time})">
<QualityLevel Index="0" Bitrate="2962000" FourCC="H264" MaxWidth="1280" MaxHeight="720" CodecPrivateData="000000016764001FAC2CA5014016EFFC100010014808080A00112A860337F980C100005A648000B4C9FE31C6080002D3240005A64FF18E1DA12251600000000168E9093525"/>
<QualityLevel Index="1" Bitrate="2056000" FourCC="H264" MaxWidth="992" MaxHeight="560" CodecPrivateData="000000016764001FAC2CA503E047BFF040003FC5202020280044AA180CDFE603030003EBE8000FAFAFE31C6060007D7D0001F5F5FC6387684894580000000168E9093525"/>
<QualityLevel Index="2" Bitrate="1427000" FourCC="H264" MaxWidth="768" MaxHeight="432" CodecPrivateData="000000016764001EAC2CA50300DEFFC100010014808080A00112A860337F980C0C000AE300002B8C7F8C718180015C600005718FF18E1DA12251600000000168E9093525"/>
<QualityLevel Index="3" Bitrate="991000" FourCC="H264" MaxWidth="592" MaxHeight="332" CodecPrivateData="0000000167640015AC2CA50250AFEFFF03FD0400520C0C0C80044AA180CDFE6030200078F80003C7C7F8C71810003C7C0001E3E3FC6387684894580000000168E9093525"/>
<QualityLevel Index="4" Bitrate="688000" FourCC="H264" MaxWidth="448" MaxHeight="252" CodecPrivateData="0000000167640015AC2CA507021FBFFC100010014830303200112A860337F980C080014FF0000A7F8FE31C604000A7F800053FC7F18E1DA12251600000000168E9093525"/>
<QualityLevel Index="5" Bitrate="477000" FourCC="H264" MaxWidth="368" MaxHeight="208" CodecPrivateData="000000016764000DAC2CA505C6EFFC10000FED4830303200112A860337F980C04003A3A0003A3A7F8C718080074740007474FF18E1DA1225160000000168E9093525"/>
<QualityLevel Index="6" Bitrate="331000" FourCC="H264" MaxWidth="284" MaxHeight="160" CodecPrivateData="000000016764000DAC2CA504857BFFF040003FE520C0C0C80044AA180CDFE60301000A198000A19FFE31C6020014330001433FFC6387684894580000000168E9093525"/>
<QualityLevel Index="7" Bitrate="230000" FourCC="H264" MaxWidth="224" MaxHeight="128" CodecPrivateData="000000016764000DAC2CA50E11BFF040003F0520C0C0C80044AA180CDFE60300001C1200038273F8C7180000E090001C139FC63876848945800000000168E9093525"/>
<c d="20000000"/>
<c d="20000000"/>
<c d="20000000"/>
...
<c d="20000000"/>
<c d="4166667"/>
</StreamIndex>
<StreamIndex Type="audio" Index="0" Name="audio" Chunks="299" QualityLevels="1" Url="QualityLevels({bitrate})/Fragments(audio={start time})">
<QualityLevel FourCC="AACL" Bitrate="160000" SamplingRate="44100" Channels="2" BitsPerSample="16" PacketSize="4" AudioTag="255" CodecPrivateData="121008C400002000000000000000000000000000000000000000000000000000000000010000000000000000000000000000000000000000000000000000000000000000000000000000000000000000"/>
<c d="20201360"/>
<c d="19969161"/>
<c d="19969161"/>
<c d="19969161"/>
<c d="19969161"/>
...
<c d="19969161"/>
<c d="19969161"/>
<c d="4643992"/>
</StreamIndex>
</SmoothStreamingMedia>

If the client request 2962k, we can be played as shown below:

The actual url from client looks like this:

http://localhost/BigBuckBunny.ism/QualityLevels(2962)/Fragments(video=12000000000)

where bitrate = 2962k and time is 120 seconds from the start.

Apache's rewrite rule translates it as:

BigBuckBunny.ism/BigBuckBunny_2962.ismv?video=12000000000

But right now it only starts from the beginning and the "Fragments()" is not working yet.

So, I made another example to test it on IIS media service (see also FFMpeg Smooth Streaming).

$ ffmpeg -y -i bunny.mov \
> -acodec libfaac -ac 2 -ab 64k \
> -vcodec libx264 -g 100 -keyint_min 100 \
> -x264opts pic-struct:no-scenecut -movflags frag_keyframe \
> -b 400k -s 640x480 \
> Bismv_400.ismv
ffmpeg version git-2013-12-18-03a5c44 Copyright (c) 2000-2013 the FFmpeg developers
  built on Dec 18 2013 13:45:10 with gcc 4.8 (Ubuntu/Linaro 4.8.1-10ubuntu9)
  configuration: --prefix=/home/khong/ffmpeg_build --extra-cflags=-I/home/khong/ffmpeg_build/include --extra-ldflags=-L/home/khong/ffmpeg_build/lib --bindir=/home/khong/bin --extra-libs=-ldl --enable-gpl --enable-libass --enable-libfdk-aac --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-nonfree --enable-x11grab --enable-libfaac
  libavutil      52. 58.101 / 52. 58.101
  libavcodec     55. 45.102 / 55. 45.102
  libavformat    55. 22.100 / 55. 22.100
  libavdevice    55.  5.102 / 55.  5.102
  libavfilter     4.  0.100 /  4.  0.100
  libswscale      2.  5.101 /  2.  5.101
  libswresample   0. 17.104 /  0. 17.104
  libpostproc    52.  3.100 / 52.  3.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'bunny.mov':
  Metadata:
    major_brand     : qt  
    minor_version   : 537199360
    compatible_brands: qt  
    creation_time   : 2008-05-27 18:32:32
    timecode        : 00:00:00:00
  Duration: 00:09:56.46, start: 0.000000, bitrate: 3342 kb/s
    Stream #0:0(eng): Video: h264 (Main) (avc1 / 0x31637661), yuv420p(tv, bt709), 854x480, 2899 kb/s, 24 fps, 24 tbr, 2400 tbn, 4800 tbc (default)
    Metadata:
      creation_time   : 2008-05-27 18:32:32
      handler_name    : Apple Alias Data Handler
    Stream #0:1(eng): Data: none (tmcd / 0x64636D74) (default)
    Metadata:
      creation_time   : 2008-05-27 18:32:32
      handler_name    : Apple Alias Data Handler
      timecode        : 00:00:00:00
    Stream #0:2(eng): Audio: aac (mp4a / 0x6134706D), 48000 Hz, 5.1, fltp, 437 kb/s (default)
    Metadata:
      creation_time   : 2008-05-27 18:32:32
      handler_name    : Apple Alias Data Handler
Please use -b:a or -b:v, -b is ambiguous
[libx264 @ 0x35fd920] using cpu capabilities: MMX2 SSE2Slow SSSE3 LZCNT SlowPalignr
[libx264 @ 0x35fd920] profile High, level 3.0
[libx264 @ 0x35fd920] 264 - core 140 r2 1ca7bb9 - H.264/MPEG-4 AVC codec - Copyleft 2003-2013 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=3 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=100 keyint_min=51 scenecut=0 intra_refresh=0 rc_lookahead=40 rc=abr mbtree=1 bitrate=400 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, ismv, to 'Bismv_400.ismv':
  Metadata:
    major_brand     : qt  
    minor_version   : 537199360
    compatible_brands: qt  
    timecode        : 00:00:00:00
    encoder         : Lavf55.22.100
    Stream #0:0(eng): Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv420p, 640x480, q=-1--1, 400 kb/s, 10000k tbn, 24 tbc (default)
    Metadata:
      creation_time   : 2008-05-27 18:32:32
      handler_name    : Apple Alias Data Handler
    Stream #0:1(eng): Audio: aac (libfaac) ([64][0][0][0] / 0x0040), 48000 Hz, stereo, s16, 64 kb/s (default)
    Metadata:
      creation_time   : 2008-05-27 18:32:32
      handler_name    : Apple Alias Data Handler
Stream mapping:
  Stream #0:0 -> #0:0 (h264 -> libx264)
  Stream #0:2 -> #0:1 (aac -> libfaac)
Press [q] to stop, [?] for help
frame=14315 fps=8.3 q=-1.0 Lsize=   34148kB time=00:09:56.48 bitrate= 469.0kbits/s    
video:29032kB audio:4673kB subtitle:0 global headers:0kB muxing overhead 1.313711%
[libx264 @ 0x35fd920] frame I:144   Avg QP:22.21  size: 32303
[libx264 @ 0x35fd920] frame P:5274  Avg QP:26.77  size:  3769
[libx264 @ 0x35fd920] frame B:8897  Avg QP:30.70  size:   584
[libx264 @ 0x35fd920] consecutive B-frames:  9.2% 18.8% 14.5% 57.5%
[libx264 @ 0x35fd920] mb I  I16..4: 12.1% 62.7% 25.2%
[libx264 @ 0x35fd920] mb P  I16..4:  1.9%  6.3%  1.1%  P16..4: 26.0%  7.8%  4.8%  0.0%  0.0%    skip:52.0%
[libx264 @ 0x35fd920] mb B  I16..4:  0.1%  0.4%  0.1%  B16..8: 19.2%  1.5%  0.3%  direct: 0.4%  skip:78.1%  L0:38.5% L1:58.5% BI: 3.1%
[libx264 @ 0x35fd920] final ratefactor: 26.73
[libx264 @ 0x35fd920] 8x8 transform intra:66.8% inter:72.2%
[libx264 @ 0x35fd920] coded y,uvDC,uvAC intra: 55.4% 64.3% 35.3% inter: 5.7% 6.0% 0.6%
[libx264 @ 0x35fd920] i16 v,h,dc,p: 33% 25%  9% 33%
[libx264 @ 0x35fd920] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 25% 13% 22%  5%  6% 10%  5%  8%  6%
[libx264 @ 0x35fd920] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 26% 14% 14%  6%  9% 11%  7%  8%  6%
[libx264 @ 0x35fd920] i8c dc,h,v,p: 53% 19% 20%  8%
[libx264 @ 0x35fd920] Weighted P-Frames: Y:6.7% UV:3.4%
[libx264 @ 0x35fd920] ref P L0: 60.8% 16.1% 13.9%  8.2%  1.0%
[libx264 @ 0x35fd920] ref B L0: 87.8% 10.4%  1.8%
[libx264 @ 0x35fd920] ref B L1: 95.1%  4.9%
[libx264 @ 0x35fd920] kb/s:398.72

$ ffmpeg -y -i bunny.mov \
> -acodec libfaac -ac 2 -ab 64k \
> -vcodec libx264 -g 100 -keyint_min 100 \
> -x264opts pic-struct:no-scenecut -movflags frag_keyframe \
> -b 400k -s 640x480 \
> Bmp4_400.mp4
ffmpeg version git-2013-12-18-03a5c44 Copyright (c) 2000-2013 the FFmpeg developers
  built on Dec 18 2013 13:45:10 with gcc 4.8 (Ubuntu/Linaro 4.8.1-10ubuntu9)
  configuration: --prefix=/home/khong/ffmpeg_build --extra-cflags=-I/home/khong/ffmpeg_build/include --extra-ldflags=-L/home/khong/ffmpeg_build/lib --bindir=/home/khong/bin --extra-libs=-ldl --enable-gpl --enable-libass --enable-libfdk-aac --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-nonfree --enable-x11grab --enable-libfaac
  libavutil      52. 58.101 / 52. 58.101
  libavcodec     55. 45.102 / 55. 45.102
  libavformat    55. 22.100 / 55. 22.100
  libavdevice    55.  5.102 / 55.  5.102
  libavfilter     4.  0.100 /  4.  0.100
  libswscale      2.  5.101 /  2.  5.101
  libswresample   0. 17.104 /  0. 17.104
  libpostproc    52.  3.100 / 52.  3.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'bunny.mov':
  Metadata:
    major_brand     : qt  
    minor_version   : 537199360
    compatible_brands: qt  
    creation_time   : 2008-05-27 18:32:32
    timecode        : 00:00:00:00
  Duration: 00:09:56.46, start: 0.000000, bitrate: 3342 kb/s
    Stream #0:0(eng): Video: h264 (Main) (avc1 / 0x31637661), yuv420p(tv, bt709), 854x480, 2899 kb/s, 24 fps, 24 tbr, 2400 tbn, 4800 tbc (default)
    Metadata:
      creation_time   : 2008-05-27 18:32:32
      handler_name    : Apple Alias Data Handler
    Stream #0:1(eng): Data: none (tmcd / 0x64636D74) (default)
    Metadata:
      creation_time   : 2008-05-27 18:32:32
      handler_name    : Apple Alias Data Handler
      timecode        : 00:00:00:00
    Stream #0:2(eng): Audio: aac (mp4a / 0x6134706D), 48000 Hz, 5.1, fltp, 437 kb/s (default)
    Metadata:
      creation_time   : 2008-05-27 18:32:32
      handler_name    : Apple Alias Data Handler
Please use -b:a or -b:v, -b is ambiguous
[libx264 @ 0x2e49920] using cpu capabilities: MMX2 SSE2Slow SSSE3 LZCNT SlowPalignr
[libx264 @ 0x2e49920] profile High, level 3.0
[libx264 @ 0x2e49920] 264 - core 140 r2 1ca7bb9 - H.264/MPEG-4 AVC codec - Copyleft 2003-2013 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=3 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=100 keyint_min=51 scenecut=0 intra_refresh=0 rc_lookahead=40 rc=abr mbtree=1 bitrate=400 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, mp4, to 'Bmp4_400.mp4':
  Metadata:
    major_brand     : qt  
    minor_version   : 537199360
    compatible_brands: qt  
    timecode        : 00:00:00:00
    encoder         : Lavf55.22.100
    Stream #0:0(eng): Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv420p, 640x480, q=-1--1, 400 kb/s, 12288 tbn, 24 tbc (default)
    Metadata:
      creation_time   : 2008-05-27 18:32:32
      handler_name    : Apple Alias Data Handler
    Stream #0:1(eng): Audio: aac (libfaac) ([64][0][0][0] / 0x0040), 48000 Hz, stereo, s16, 64 kb/s (default)
    Metadata:
      creation_time   : 2008-05-27 18:32:32
      handler_name    : Apple Alias Data Handler
Stream mapping:
  Stream #0:0 -> #0:0 (h264 -> libx264)
  Stream #0:2 -> #0:1 (aac -> libfaac)
Press [q] to stop, [?] for help
frame=14315 fps= 18 q=-1.0 Lsize=   33966kB time=00:09:56.48 bitrate= 466.5kbits/s    
video:29030kB audio:4673kB subtitle:0 global headers:0kB muxing overhead 0.781453%
[libx264 @ 0x2e49920] frame I:144   Avg QP:22.21  size: 32307
[libx264 @ 0x2e49920] frame P:5274  Avg QP:26.77  size:  3768
[libx264 @ 0x2e49920] frame B:8897  Avg QP:30.71  size:   584
[libx264 @ 0x2e49920] consecutive B-frames:  9.2% 18.8% 14.5% 57.5%
[libx264 @ 0x2e49920] mb I  I16..4: 12.0% 62.8% 25.2%
[libx264 @ 0x2e49920] mb P  I16..4:  1.9%  6.3%  1.1%  P16..4: 26.0%  7.8%  4.8%  0.0%  0.0%    skip:52.0%
[libx264 @ 0x2e49920] mb B  I16..4:  0.1%  0.4%  0.1%  B16..8: 19.2%  1.5%  0.3%  direct: 0.4%  skip:78.2%  L0:38.4% L1:58.5% BI: 3.1%
[libx264 @ 0x2e49920] final ratefactor: 26.73
[libx264 @ 0x2e49920] 8x8 transform intra:66.7% inter:72.2%
[libx264 @ 0x2e49920] coded y,uvDC,uvAC intra: 55.4% 64.2% 35.3% inter: 5.7% 6.0% 0.6%
[libx264 @ 0x2e49920] i16 v,h,dc,p: 33% 25%  9% 33%
[libx264 @ 0x2e49920] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 25% 13% 22%  5%  6% 10%  5%  8%  6%
[libx264 @ 0x2e49920] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 26% 14% 14%  6%  9% 11%  7%  8%  6%
[libx264 @ 0x2e49920] i8c dc,h,v,p: 53% 19% 20%  8%
[libx264 @ 0x2e49920] Weighted P-Frames: Y:6.7% UV:3.4%
[libx264 @ 0x2e49920] ref P L0: 60.8% 16.1% 13.9%  8.2%  1.0%
[libx264 @ 0x2e49920] ref B L0: 87.7% 10.4%  1.9%
[libx264 @ 0x2e49920] ref B L1: 95.1%  4.9%
[libx264 @ 0x2e49920] kb/s:398.69

Here is the input video: bear.mp4.

From vlc:

From mplayer:

Playing bear.mp4.
libavformat version 53.21.1 (external)
Mismatching header version 53.19.0
libavformat file format detected.
[lavf] stream 0: video (h264), -vid 0
[lavf] stream 1: audio (aac), -aid 0, -alang und
VIDEO:  [H264]  1280x720  24bpp  25.000 fps  2815.4 kbps (343.7 kbyte/s)
Clip info:
 major_brand: mp42
 minor_version: 0
 compatible_brands: isommp42
 creation_time: 2013-11-21 00:01:55

Here is an example of creating a fragmented MP4 file: bear.ismv.

For the audio stream we select the AAC codec at a bitrate of 64 kbits/sec. For the video stream we select the H.264 codec at a bitrate of 400 kbits/sec and at a resolution of 848x400.

$ AUDIO_OPTIONS="-c:a libfaac -ac 2 -b:a 64k"
$ VIDEO_OPTIONS="-c:v libx264 -preset fast -profile:v baseline -g 100 -keyint_min 100"
$ FFMPEG_OPTIONS="-x264opts pic-struct:no-scenecut -movflags frag_keyframe"
$ MAP="-map 0:v -b:v:0 400k -s:v:0 848x400 -map 0:a:0"

$ ffmpeg -y -i bear.mp4 $AUDIO_OPTIONS $VIDEO_OPTIONS $FFMPEG_OPTIONS $MAP bear.ismv

The parameters used for the settings

• preset - default: medium
  Change options to trade off compression efficiency against encoding speed. If you specify a preset, the changes it makes will be applied before all other parameters are applied.
  You should generally set this option to the slowest you can bear.
  Values available: ultrafast, superfast, veryfast, faster, fast, medium, slow, slower, veryslow, placebo.
  
• profile - default: not set
  Limit the profile of the output stream. If you specify a profile, it overrides all other settings, so if you use it, you will be guaranteed a compatible stream. If you set this option, you cannot use lossless encoding (--qp 0 or --crf 0).
  You should set this if you know your playback device only supports a certain profile. Most decoders support High profile, so there's no need to set this.
  Values available: baseline, main, high, high10, high422, high444.
  
• g - Keyframe interval, also known as GOP length.
  This determines the maximum distance between I-frames.
  Very high GOP lengths will result in slightly more efficient compression, but will make seeking in the video somewhat more difficult.
  Recommended default: 250
• keyint_min - Minimum GOP length
  the minimum distance between I-frames.
  Recommended default: 25
• pic-struct
  Default: Not Set
  Force sending pic_struct in Picture Timing SEI.
  Implied when you use --pulldown or --tff/--bff.
• no-scenecut
  Default: Not Set
  Completely disables adaptive I-frame decision.
• movflags frag_keyframe
  Start a new fragment at each video keyframe.
• ac 2
  number of audio channels, in our case, 2 channels

For more details on the settings parameters, please check the links below:

• http://mewiki.project357.com/wiki/X264_Settings
• https://sites.google.com/site/linuxencoding/x264-ffmpeg-mapping
• http://www.ffmpeg.org/ffmpeg-formats.html

Info from mplayer while playing bear.ismv:

Playing bear.ismv.
libavformat version 53.21.1 (external)
Mismatching header version 53.19.0
libavformat file format detected.
[lavf] stream 0: video (h264), -vid 0
[lavf] stream 1: audio (aac), -aid 0, -alang und
VIDEO:  [H264]  848x400  24bpp  25.000 fps    0.0 kbps ( 0.0 kbyte/s)
Clip info:
 major_brand: isml
 minor_version: 512
 compatible_brands: piffiso2
 encoder: Lavf55.22.100
Load subtitles in ./

$ AUDIO_NONE="-an"
$ AUDIO_OPTIONS="-acodec libfaac -ac 2 -ab 64k"
$ VIDEO_OPTIONS="-vcodec libx264 -preset veryfast -g 100 -keyint_min 100"
$ FFMPEG_OPTIONS="-x264opts pic-struct:no-scenecut -movflags frag_keyframe"

$ ffmpeg -y -i bear.mp4 $AUDIO_NONE $VIDEO_OPTIONS $FFMPEG_OPTIONS -b 200k -s 608x288 bear_200.ismv
$ ffmpeg -y -i bear.mp4 $AUDIO_OPTIONS $VIDEO_OPTIONS $FFMPEG_OPTIONS -b 400k -s 848x400 bear_400.ismv

Making ism and ismc using ffmpeg ismindex:

$ ismindex -n bear bear_200.ismv bear_400.ismv

On vlc, the following two cases with network input play video:

Note that we need to prepend http:// before localhost.

But neither of them does not seem to be starting at the specified time. It always starts from the beginning and plays to the end.

The Firebox browser does not like both of them.

The Apache server setup looks like this for the vlc run:

# AddHandler h264-streaming.extensions .mp4 .ism 

LoadModule rewrite_module modules/mod_rewrite.so

RewriteEngine On
RewriteCond %{QUERY_STRING} ^.+$
RewriteRule ^(.*)\.ism/manifest$ $1.mp4?manifest=1 [L]
RewriteRule ^(.*)\.ism/Fragments\((.*)=([0-9]+)\)(.*)$ $1.mp4?$2=$3 [L]
RewriteRule ^(.*)/(.*)\.ism/QualityLevels\(([0-9]+)\)/Fragments\((.*)=([0-9]+)\)(.*)$ $1/$2.ism/$2_$3.ismv?$4=$5 [L]
RewriteRule ^(.*)\.ism/QualityLevels\(([0-9]+)\)/Fragments\((.*)=([0-9]+)\)(.*)$ $1.ism/$1_$2.ismv?$3=$4 [L]

LogLevel rewrite:trace3

If we create the frags (ffmpeg ...) in mp4 container and copy it to ismv, things are different: it plays only the fragment though it still starts from the beginning. When we play ismv/mp4 files using vlc or mplayer, we see it have all the frags from the beginning to the end. But the H264 module for Apache does not process ismv directly generated from ffmpeg. It only processes ismv version copied from mp4. Also, as mentioned earlier, it does not properly process the timestamp (offset).

This method is generally used if you are targeting a specific output file size and output quality from frame to frame is of less importance. This is best explained with an example. Your video is 10 minutes (600 seconds) long and an output of 50 MB is desired. Since bitrate = file size / duration:
(from https://trac.ffmpeg.org/wiki/x264EncodingGuide)

(50 MB * 8192 [converts MB to kilobits]) / 600 seconds = ~683 kilobits/s total bitrate
683k - 128k (desired audio bitrate) = 555k video bitrate

For my case, it looks like this:

$ AUDIO_NONE="-an"
$ AUDIO_OPTIONS="-c:a libfaac -ac 2 -b:a 64k"
$ VIDEO_OPTIONS="-c:v libx264 -preset medium -profile:v baseline -g 100 -keyint_min 100"
$ FFMPEG_OPTIONS="-x264opts pic-struct:no-scenecut -movflags frag_keyframe"

$ MAP1="-map 0:v -b:v:0 350k -s:v:0 408x228"
$ MAP2="-map 0:v -b:v:0 700k -s:v:0 568x320"
$ MAP3="-map 0:v -b:v:0 1000k -s:v:0 704x396 -map 0:a:0"

$ ffmpeg -y -i bear.mp4 $AUDIO_NONE $VIDEO_OPTIONS $FFMPEG_OPTIONS -pass 1 $MAP1 -f ismv /dev/null && \
ffmpeg -i bear.mp4 $AUDIO_NONE $VIDEO_OPTIONS $FFMPEG_OPTIONS -pass 2 $MAP1 bear_350.ismv

$ ffmpeg -y -i bear.mp4 $AUDIO_NONE $VIDEO_OPTIONS $FFMPEG_OPTIONS -pass 1 $MAP2 -f ismv /dev/null && \
ffmpeg -i bear.mp4 $AUDIO_NONE $VIDEO_OPTIONS $FFMPEG_OPTIONS -pass 2 $MAP2 bear_700.ismv

$ ffmpeg -y -i bear.mp4 $AUDIO_OPTIONS $VIDEO_OPTIONS $FFMPEG_OPTIONS -pass 1 $MAP3 -f ismv /dev/null && \
ffmpeg -i bear.mp4 $AUDIO_OPTIONS $VIDEO_OPTIONS $FFMPEG_OPTIONS -pass 2 $MAP3 bear_1000.ismv

However, with those output, I failed to get manifest file because of the duration mismatch:

$ /home/khong/ffmpeg_sources/ffmpeg/tools/ismindex/ismindex -n bear bear_bear_350.ismv bear_700.ismv bear_1000.ismv
Mismatched duration of video chunk 0 in bear_350.ismv and bear_1000.ismv

It turns out that audio "-map 0:a:0" in MAP3 was the culprit!
Here are the new commands after removing it (no audio):

$ AUDIO_NONE="-an"
$ AUDIO_OPTIONS="-c:a libfaac -ac 2 -b:a 64k"
$ VIDEO_OPTIONS="-c:v libx264 -preset fast -profile:v baseline -g 100 -keyint_min 100"
$ FFMPEG_OPTIONS="-x264opts pic-struct:no-scenecut -movflags frag_keyframe"

$ MAP1="-map 0:v -b:v:0 350k -s:v:0 408x228"
$ MAP2="-map 0:v -b:v:0 700k -s:v:0 568x320"
// note No Audio here
$ MAP3="-map 0:v -b:v:0 1000k -s:v:0 704x396"

$ ffmpeg -y -i bear.mp4 $AUDIO_NONE $VIDEO_OPTIONS $FFMPEG_OPTIONS -pass 1 $MAP1 -f ismv /dev/null && \
ffmpeg -i bear.mp4 $AUDIO_NONE $VIDEO_OPTIONS $FFMPEG_OPTIONS -pass 2 $MAP1 bear_350.ismv

$ ffmpeg -y -i bear.mp4 $AUDIO_NONE $VIDEO_OPTIONS $FFMPEG_OPTIONS -pass 1 $MAP2 -f ismv /dev/null && \
ffmpeg -i bear.mp4 $AUDIO_NONE $VIDEO_OPTIONS $FFMPEG_OPTIONS -pass 2 $MAP2 bear_700.ismv

$ ffmpeg -y -i bear.mp4 $AUDIO_OPTIONS $VIDEO_OPTIONS $FFMPEG_OPTIONS -pass 1 $MAP3 -f ismv /dev/null && \
ffmpeg -i bear.mp4 $AUDIO_OPTIONS $VIDEO_OPTIONS $FFMPEG_OPTIONS -pass 2 $MAP3 bear_1000.ismv

Now, we do not have any problem creating manifest files (ism, ismc).

$ /home/khong/ffmpeg_sources/ffmpeg/tools/ismindex -n bear bear_350.ismv bear_700.ismv bear_1000.ismv
$ ls
bear_1000.ismv  bear_350.ismv  bear_700.ismv  bear.ism  bear.ismc  bear.mp4

However, those are for the case without any audio. So, I need to investigate the reason for the duration mismatch.

If we take another input such as:

wget http://bogotobogo.com/VideoStreaming/Files/nginxSmoothStream/oceans.mp4

it will produce proper manifest files (ism and ismc).

So, this might be an input file issue.

References used in this section:

• Encoding Profiles
• Encoders
• Creation of the Unified Streaming VOD pack

We probably want to test the smooth streaming using Silverlight. (for more info on testing on Windows, please visit ffmpeg - smooth streaming).

In my case, I wanted to see server's response to a request for http://192.168.1.1/bear.ism/manifest from another Windows machine. To do that, I used Silverlight. The only thing for the Apache server to make it work is to bind the port with the address in /usr/local/apache2/conf/httpd.conf:

Listen 127.0.0.1:80
Listen 192.168.1.1:80